Polaris Screen System

Min. – Max. Frame Size	16″” x 16″” OD (41 cm x 41 cm) to 34″” x 40″” OD (86 cm x 102 cm)
Power Supply	208-230 V AC, 1 Ph, 16 Amps, 50 Hz
Total Power Consumption	3.8 kW
Screen Frame Thickness	1.0″ – 1.5″
Mechanical Stretcher / Tension Meter
Max. Tension Permitted	16 to 20 Newtons (Depending On Fabric)
Emulsion Coating Stand & Trough
Coating Trough Length With 2 End Cover	23″(58 cm)
Screen Dryer
Auto Switch-Off Timer	1 to 30 Mins.
Max. Heating Capacity	45° C
Power Consumption	2.6 kW
Screen Exposer
Exposing Lamp	Metal Halide – 1000 Watts
Power Consumption	1.2 kW
Dimensions (LxWxH)	10.5′ (L) x 4.5′ (W) x 7.0′ (H)/ 126″” (L) x 54″” (W) x 84″” (H)/ 320 (L) x 137 (W) x 213 (H) cm
Weight	10.5′ (L) x 4.5′ (W) x 7.0′ (H)/ 126″” (L) x 54″” (W) x 84″” (H)/ 320 (L) x 137 (W) x 213 (H) cm

No expensive air compressors required, no electricity required
Quick fabric locking for faster setup
8 adjustable stretching knobs enables to maintain proper tension on wrap and weft
Adjustable clamping device stretches min 16” x 16” to max 34” x 40” OD frames
Tension meter helps to stretch fabrics to its optimum

Unique spring loaded clamp holds the screen firmly to avoid shake while coating and saves on additional person to hold the screen while coating
Fully anodised coating trough with superior edge quality, obtains smooth emulsion finish, avoids marks and streaks
Adjustable clamping device to suit various screen frame size which also helps turn screen faster for coating both sides
Emulsion coater storage shelf avoids dust and pre-exposure of emulsion

3 screens storage capacity maximizes production
Double wall fabrication with thermal insulation to retain heat and minimize power consumption
High efficiency heaters dries emulsion faster and reduces downtime for additional coats
Horizontal screen drying equalises emulsion thickness delivers better Rz value (Smooth flat emulsion)
Compact low power low noise fans ensures perfect air circulation
Digital temperature controller maintains consistent temperature

High quality metal halide lamp delivers faster exposure, best for dual cure and photopolymer emulsions
Digital light integrator ensures perfect exposure with consistency and repetition accuracy
Highly stretchable good quality vacuum rubber blanket makes perfect contact between fabric and positives for quality reproduction delivers finer reproduction details and produces sharp edges
Mirror finish reflector increases light efficiency
Top cover to avoid light reflection in darkroom thus avoids pre-exposure if coated screens are stored in the same room
Powerful low maintenance vacuum pump for fast production
Gas cylinder for comfortable loading of glass frame

Uniform light provides conveniency in spot touching and screen inspection
Light automatically turns ON when screen inspector pulled out, switches OFF when pushed
Screen inspector mounted on guide rails slide in with screen frame and saves time

Nilesh Enterprise